Extron electronics TouchLink TLP 350CV, Руководство по установке

Страница: 35 / 51

4.
Click
OK
and the Project Settings screen closes and is replaced by the “Add Device”
dialog box:
Figure 21. Global Configurator Add Device Dialog Box
To see all the options, click on the “
Advanced >>>
“ button. The button name changes
to “
Basic <<<
“ (as shown in the figure above).
a. Select the IP Link device from the drop-down menu. In figure 32, above, an IPL 250
controller is added. Adding a different IP Link product will be similar.
b.
enter the IP address of the IP Link controller. The default value is 192.168.254.254,
but this may have been changed. Check with your IT Department to verify the
address.
c.
enter a Display Name into the text box. This is what the device will be known as in
the Global Configurator project.
d.
Checking the “
Make this device a GlobalViewer Host
“ checkbox is optional.
e. Set the telnet port (usually 23) and the web port (usually 80).
f.
If the controller is password protected, enter the password now.
g.
In the right pane, set up a GlobalViewer tree. For information about this, refer to
the Global Configurator help file.
TLP 350CV • Configuration Software 29