manualshive.com logo in svg

Extron electronics PVS 407D, Руководство пользователя

Поделиться
Скачать
Extron electronics PVS 407D Скачать руководство пользователя страница 19

Enabling and Activating LinkLicense

Refer to 

LinkLicense

 starting on page 53 to enable and activate the Audio Decoding 

LinkLicense through the PVS 407D internal webpage. A couple of things to consider:

• 

PVS 407D Audio Decoding LinkLicense

 – The PVS 407D switcher must have 

firmware 5.00 or above with the Audio Decoding LinkLicense, part 79-2558-01, 
enabled to directly playback bells and announcements from GlobalViewer Campus 
Communication Suite server version 2.0.0.

• 

Audio Stream Settings

 – The Audio Stream settings on the PVS 407D default 

webpage are disabled until the PVS 407D Audio Decoding LinkLicense is applied 
to the switcher. With the LinkLicense successfully added, audio stream settings 
are accessible. IP address and UDP port settings should be coordinated with your 
GlobalViewer Campus Communication Suite and network administrators for proper 
operation. 

For assistance with LinkLicense activation, please contact your Extron Support 
Representative.

Front Panel Security Lockout (Executive Mode)

To prevent accidental or unauthorized changes to settings, the PVS switcher has a front 
panel security lockout (executive mode) that limits access to front panel controls. 
When the front panel security lockout mode is active, all front panel functions are locked 
except the reset button. This mode can also be turned on or off via an SIS command (see 

Front panel lockout mode (executive mode)

 on page 25).

All the input LED indicators light up for one second to indicate that executive mode has 
been enabled or disabled. 
To turn executive mode on or off via the front panel:

1. 

Press and hold the input 

Select

 button until all input LEDs blink (approximately 

8 seconds).

2. 

Release the button. The LEDs go out except for the currently selected input. The 
switcher has enabled or disabled the executive mode.

INPUTS

1
2

SELECT

3
4

7

AUX

AUDIO

5
6

Press and hold
button for 8 seconds.

All input LEDs (including Aux) flash. 
The LEDs extinguish except for the currently selected input.
Executive mode has been enabled or disabled.

Figure 9. 

Setting the Executive Mode via the Front Panel

This mode can also be turned on or off through PCS software, TCP/IP, USB, or RS-232 
control.
For details, see 

SIS Communication and Control

 on page 19 or the 

PVS 407D PCS 

Help

 file. 

9 

 

PVS 407D Switcher • Operation

13

 

Содержание PVS 407D







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды