manualshive.com logo in svg

Extron electronics PVS 407D, Руководство пользователя

Поделиться
Скачать
Extron electronics PVS 407D Скачать руководство пользователя страница 47

Connect

 — Connects to a device (via an existing USB connection, TCP/IP,  or Pass-thru 

via MLC connection) and configuration becomes live (see 

Connect to a Device

 on the 

next page for details).

NOTE:

  If a device is already connected, the 

Connect

 option is disabled until the 

device is disconnected or the connection times out.

Connect and Apply

 — Connects to a device (via an existing USB connection, TCP/IP, or 

Pass-thru via MLC connection) and applies the current PCS configuration.

Deploy Configuration to Device(s)

 — Connects and deploys current configuration to 

multiple devices simultaneously.

Disconnect

 — Disconnects from a connected device.

Settings

 — This opens to two submenus:

• 

Hardware Settings

 — Opens the 

Hardware Settings 

window that accesses a 

read-only 

Unit Information

 page and a 

Device Name

 option page.

• 

Communication Settings

 — Opens the 

Communication Settings 

window 

that allows the user to change the settings for the TCP/IP connection to the device.

Reset Device

 — Allows the user to reset the device.

NOTE:

  The factory configured password for all accounts on this device have been 

set to the device serial number. If the switcher is reset, the password reverts to the 
default, which is no password. 

Update Firmware

 — Opens to two submenus to start the update process for either this 

device or multiple devices.

NOTE:

  If a device is not connected, the 

Disconnect

, 

Reset

, and 

Update

 

Firmware

 options are disabled until the device is connected.

PVS 407D Help

 — Opens the device specific Help file. This file opens in a browser and 

has an embedded PDF file for printing if desired.

About This Module

 — Opens an information box with module name, version number, 

and compatible devices details.
For details of these menus see the 

PVS 407D Help file

.

 

PVS 407D • Configuration Software

41

Содержание PVS 407D







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды