30
PVS 407D • SIS Communication and Control
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
VoiceLift Pro Microphone Pairing
Initiate pairing
E
1PAIR
}
Pair1
]
Pair
X3* X3(]
or Pair*E25
]
or Pair*E14
]
Default is On.
Unsolicited response is sent out when
one of the LINK slots is successfully
paired or pairing fails after 30 second
timeout (for example Pair10).
Only one microphone can be paired at
a time.
Device is not present.
VLR 102 detected, expected VLR 302.
NOTE:
When both LINK slots are occupied, user/PCS must clear the existing pairing first (
0
PAIR) prior to initiate pairing (1 PAIR) otherwise
firmware sends out
Pair99
response indicating both LINK slots are already occupied.
Clear pairing
E
0PAIR
}
Pair0
]
Pair00
]
or Pair*E25
]
or Pair*E14
]
Remove all pairing.
Unsolicited response sent after the
Pair0 response that previous pairing
has been successfully cleared.
Device is not present.
VLR 102 detected, expected VLR 302.
View pairing
E
PAIR
}
Verbose mode 2/3
X3* X3(]
or E25
]
or E14
]
Pair
X3* X3(]
or Pair*E25
]
or Pair*E14
]
Indicates whether microphones are
paired to each LINK slot.
Device is not present.
VLR 102 detected, expected VLR 302.
NOTES:
•
Example A:
Pair99
unsolicited response is sent out when the VLR 302 receiver is unable to enter pairing mode due to an already paired
microphone is On and connected, or both LINK slots are already occupied.
•
Example B:
Pair11
response indicates that microphones are paired to both LINK slots 1 and 2. User must clear the pairing first (
0
PAIR) prior
to initiate pairing (1 PAIR) to pair new microphone otherwise firmware sends out
Pair99
(see above).
KEY:
X3*
= LINK slot 1
0
= LINK slot 1 is not paired or pairing fails.
1 = LINK slot 1 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
X3(
= LINK slot 2
0
= LINK slot 2 is not paired or pairing fails.
1 = LINK slot 2 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
VoiceLift Pro Chime Setting
Set audible chime
E
X3&
CHIM
}
Chim
X3&]
or Chim*E25
]
or Chim*E14
]
Default is On.
Device is not present.
VLR 102 detected, expected VLR 302.
View audible chime
E
CHIM
}
Verbose mode 2/3
X3&]
or E25
]
or E14
]
Chim
X3&]
or Chim*E25
]
or Chim*E14
]
View audible chime status.
Device is not present.
VLR 102 detected, expected VLR 302.
KEY:
X3&
= Audible Chime
0
= Off/disable
1
=
On/enable
(default)
E25
= Device not present/detected
