Connect to a Device
To connect to the device or re-establish the connection:
1.
From the device menu, select
Connect...
. The
Connect
dialog box opens.
Figure 22.
Connect Dialog Box
2.
Choose the device from the
Device Discovery
list (TCP/IP or USB connection)
or select the
Pass-Thru
tab, depending on the desired connection method. For
devices where the IP address is known, but the device is not listed, select the
TCP/IP
tab.
NOTE:
The factory configured password for all accounts on this device have
been set to the device serial number. Passwords are case sensitive. If the
switcher is reset, the password reverts to the default, which is no password. A
new password would need to be configured to secure the device.
•
For a USB or TCP/IP connection
, select a listed device (see figure 22).
•
For a Pass-Thru connection
:
a.
Click the
Pass-Thru
tab. The
Pass-Thru
panel appears (see
on
the next page).
b.
Enter the IP address of the connected MLC. When checked, the
Show
Characters
check box allows the user to see the password letters when
typed in.
c.
If applicable, enter the password of the connected MLC.
d.
Enter the
Telnet Port
for the connected MLC (default is 23).
e.
Enter the
Pass-Thru Port
number for the connected MLC (default is 2003).
22
PVS 407D • Configuration Software
42
