Paging Sensitivity Adjustment
When the Priority Page Sensor is connected to the Priority sensor input on the rear panel,
the HDMI output audio, amplified and line out audio outputs are muted during a system
announcement. The amber LED indicator lights when an announcement or page is made
over the facility PA system.
The PPS 25 Priority Page Sensor works with 25 V/70 V and 4/8 ohms paging systems.
The PPS 35 Priority Page Sensor works with any public address system speakers.
To adjust paging sensitivity, use the
Paging Sensor
sensitivity buttons to increase or
decrease sensitivity.
AUDIO LEVEL ADJUST
PEAK
NORMAL
SIGNAL
INPUT
PEAK
NORMAL
SIGNAL
VOICELIFT
PAGING
SENSOR
LED lights
during announcement
or page.
Figure 12.
Front Panel Paging Sensor Min/Max LED and Adjustment Buttons
(see page 32) (1 to 8, in 1 second steps,
0
= disabled) can
be set via SIS or configuration software. The default =
3
(enabled).
NOTE:
The Paging Sensor port must be enabled in order to operate fully.
The paging sensor hold time can be set via SIS or configuration software to ensure
the amplified and line out audio outputs stay muted for a specific duration after an
announcement or page is finished. This is to prevent the audio being un-muted if the
announcer pauses or stops talking while making the announcement or page.
12
PVS 407D Switcher • Operation
18
