25
PVS 407D • SIS Communication and Control
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
Front panel lockout mode (executive mode)
Enable locked mode
1X
Exe1
]
Lock the entire front panel.
Disable locked mode
0X
Exe0
]
Unlock the front panel.
View status
X
X3$
]
View the lock mode.
KEY:
X3$
= Status
0
= Off/disabled (default)
1
= On/enabled
Power save mode
Disable power save
E
0PSAV
}
Psav
X2)
]
Turns off power save mode, sets timer
to zero (default).
Enable auto power save
E
1PSAV
}
Psav
X2)
]
Timer starts count but is not triggered.
Switcher enters auto power save
mode if there is no active AV signal for
25 minutes.
Force auto power save on
E
2PSAV
}
Psav
X2)
]
Turns on auto power save mode.
Force standby power save on
E
3PSAV
}
Psav
X2)
]
Turns on standby power mode.
Force network standby power
save on
E
4PSAV
}
Psav
X2)
]
Turns on standby power mode
(network switch off).
View setting
E
PSAV
}
X2)
]
View power save status.
Verbose mode 2/3
Psav
X2)
]
KEY:
X2)
= Power save mode
0
= auto power save and standby power mode off (power save off) (default)
1 = set auto power save timer running, but not triggered
2 = auto power save on (timer triggered)
3 = standby power save on (turn off peripheral devices except network switch)
4 = network standby power save on (turn off network switch)
Device information requests
View fan status
21S
X3$
]
View status of internal fan.
Verbose mode 2/3
Sts21*
X3$
]
View switchable Signal,
Normal, and Peak status
1S
Sig
X3$
•
Norm
X3$
•
Clp
X3$
]
View switchable audio Signal, Normal,
and Peak status.
Verbose mode 2/3
Sts01*Sig
X3$
•
Norm
X3$
•
Clp
X3$
]
View VoiceLift receiver Mic
input Signal, Normal, and
Peak status
4S
Sig
X3$
•
Norm
X3$
•
Clp
X3$
]
View VoiceLift receiver Mic input Signal,
Normal, and Peak status.
Verbose mode 2/3
Sts04*
Sig
X3$
•
Norm
X3$
•
Clp
X3$
]
View Aux input Signal, Normal,
and Peak status
5S
Sig
X3$
•
Norm
X3$
•
Clp
X3$
]
View Aux input audio Signal, Normal,
and Peak status.
Verbose mode 2/3
Sts05*Sig
X3$
•
Norm
X3$
•
Clp
X3$
]
View video signal presence
E
LS
}
X&
•
X&
•
X&
•
X&
•
X&
•
X&]
View which input video signals are
present for inputs (L-R, Inputs 1
to
6).
Verbose mode 2/3
Sig
X&
•
X&
•
X&
•
X&
•
X&
•
X&]
KEY:
X&
= Video signal status
0
= Video/TMDS signal not detected
1 = Video/TMDS signal detected
2 = Unknown
X3$
= Status
0
= Off/disable
1 = On/enable
