54
WT.050.590.000.DE.IM.0719
Functions
SFC
4.
Preparing the electrodes
1
Screw the injection cap on the bottle with the fill solution.
2
Pour a little fill solution into the filling hole. Then rinse the
electrode to wet the electrode body O-ring.
3
Press on the electrode cap until the electrode body is
loosened slightly from the epoxy cover so that the cone is also
wet.
4
Release the cap.
If the protective cover does not immediately return to its
original position, check whether the O-ring is wet enough and
repeat steps 2 and 3 until the protective cover returns.
5
The electrode must be filled with electrolyte up to the filling
hole.
6
Before use, the electrode should be placed in a 100 mg/l
fluoride solution at pH 7 for approx. 24 hours (e.g. calibration
solution).
A cap
B spring
C cable
D O-ring
E vent
F
filling hole
G cone
H reference element
I
protective cover
J
chamber for fill solution
K electrode body
Please note
The filling hole or vent must remain open. The solution in the
electrode may not be contaminated by other liquids.
Installing the fluoride sensor in
the flow block assembly
1
Install the fluoride sensor in the corresponding opening on the
flow block assembly in the Y-style flow through assembly.
2
Connect the sensor to the sensor cable marked „F
-
“.
3
The fluoride sensor can be calibrated for the first time after
approx. two to three hours running-in time.
Please note
The calibration must be checked after one day.
A
B
C
D
E
F
G
H
I
J
K
Содержание WALLACE & TIERNAN SFC
