evertz 5600MSC Series, Инструкция по эксплуатации

Страница: 92 / 128

Model 5600MSC Master Clock/SPG Manual
Page 3-50
Revision 1.6
OPERATION
3.6.11.3. Setting the Audio Event Sound Type
OUTPUT
AUDIO EVENT 1
A1 Sound Type
A1 sound mute
A1 sound tone
A1 sound beep
A1 sound bell
A1 sound klaxon
This menu item sets the type of sound will occur at the audio event start
time. The frequency of the audio sound is set by using the
A1 Sound Freq
menu item. Mute is no sound output. Tone is a continuous tone. If tone is
set, then Start Time and Duration are ignored. Beep is a pure tone that
starts at start time and lasts for duration. Bell is a bell sound that starts at
start time and lasts for duration. Klaxon is a square wave tone that starts at
start time and lasts for duration
3.6.11.4. Setting the Audio Event Sound Frequency
OUTPUT
AUDIO EVENT 1
A1 Sound Freq
A1 freq 60 hz
A1 freq 100 hz
A1 freq 200 hz
A1 freq 250 hz
A1 freq 400 hz
A1 freq 500 hz
A1 freq 750 hz
A1 freq 1.0 khz
A1 freq 2.0 khz
A1 freq 3.0 khz
A1 freq 6.0 khz
This menu item sets the frequency of the sound that will occur at the audio
event start time.
3.6.11.5. Setting the Audio Event Duration
OUTPUT
AUDIO EVENT 1
A1 Sound Durat’n
A1 dur 0.1 sec
This menu item sets the duration of the sound that will occur at the audio
event start time. It is variable from 0.1 to 10.0 seconds
3.6.11.6. Testing the Audio Sound
OUTPUT
AUDIO EVENT 1
A1 Test Tone
This menu item allows the user to test the sound that will occur at the audio
event start time. The front panel will show the tone type that was selected
by the
A1 Sound Type menu item. Press the SELECT button to test the
sound. It is only valid if Sound Type is set to Beep, Bell or Klaxon.
3.6.11.7. Setting up Audio Event Sequences
The Ten audio events can be combined in any combination in order to create a sequence of tones that
will occur at a regular time each day.
USO
RESTRITO