evertz 5600MSC Series, Инструкция по эксплуатации

Страница: 5 / 128

Model 5600MSC Master Clock/SPG Manual
Revision 1.6
v
NOTICE TO MODEM USERS IN THE USA
The 5600MSC Master Clock/Sync Generator complies with the FCC Rules Part 68. The 5600MSC is
designed to be used on standard device telephone lines. It connects to the telephone line by means of
a standard jack called the USOC RJ11C and should be connected to the telephone network with a FCC
compliant telephone cord and modular plug.
It is not necessary to notify the telephone company before connecting the modem in the 5600MSC.
However, the telephone company may request the telephone number to which the 5600MSC modem is
connected and the FCC registration number and ringer equivalence number (REN), both of which are
on the label on the rear panel.
The REN is used to determine the number of devices you may legally connect to your telephone line.
In most areas, the sum of the REN of all devices connected to one line must not exceed five (5.0). You
should contact your telephone company to determine the maximum REN for your calling area.
The 5600MSC may not be used on coin service provided by the telephone company. Connection to
party lines is subject to state tariffs.
If the modem in the 5600MSC is malfunctioning, it may affect the telephone lines. In this case,
disconnect the modem until the source of the difficulty is traced.
IMPORTANT INSTALLATION NOTICE
FOR A RELIABLE TELEPHONE CONNECTION TO THE MODEM IN THIS
5600MSC A DIRECT TELEPHONE LINE MUST BE USED. THIS LINE MUST
NOT PASS THROUGH A PBX OR SIMILAR KEY DEVICE.
USO
RESTRITO