TCP/IP Network Access Controller
24
Pressing “*” before pressing “#” for confirmation, the new password will not take effect and
the system will return to the previous menu.
4.4.7
Set ARM Password
Before protection setup and withdrawal of the controller, the alarm administration
password must be input through the keyboard. The default alarm administration password
is 00000000.
In the “System Setting” menu, scroll to “Set ARM Password” menu item and press “#” to
enter the “Set ARM Password” interface.
After inputting a new system administration password twice, press “#” to confirm and the
system will display whether the new password takes effect. If the passwords entered are
different, the system will prompt to reset.
Passwords mismatch
Please retry
Setting updated
successfully
Repeat:
_ _ _ _ _ _
Cancel
OK
Input ARM PIN
_ _ _ _ _ _
Cancel
OK
Set Time
Auto Daylight
Set SYS Password
Set ARM Password
Passwords mismatch
Please retry
Setting updated
successfully
Repeat:
_ _ _ _ _ _
Cancel
OK
Input SYS PIN
_ _ _ _ _ _
Cancel
OK