TCP/IP Network Access Controller
33
4.6
Reader Setting
Card reader properties can be directly set up on the controller, including system reader, aux
reader and the allocation of readers to doors.
4.6.1
Enter Reader Setting Menu
In the “System Setting” main menu, scroll to “Reader Setting” menu item and press “#” to
enter the “Reader Setting” submenu.
4.6.2
Set SYS Reader
The Set SYS Reader menu includes Timeout Time and Direction settings. You can set up the
timeout time for PIN input. When users input wrong password or no operation is activated
within the setup time, the system will return to the main menu automatically. The Direction
setting is used to control the entry/exit direction and indicate the allocation of readers to
door.
4.6.2.1
Timeout Time
In the “Reader Setting” menu, select “Set SYS Reader” menu item and press “#” to enter its
interface.
Select “Timeout Time” menu item, press “#” to enter the interface below. Use the numeric
buttons to input time. The time range limit is between 000 Min 03 Sec and 999 Min 59 Sec.
Press “#” to confirm and the setting will take effect. Press “*” to erase the input time and
re-input the time.
Timeout Time
000 Min 10 Sec
Cancel
OK
Timeout Time
Direction
Set SYS Reader
Set AUX Reader
System Setting
Card Setting
Reader Setting
