TCP/IP Network Access Controller
19
The default password of the system is 00000000. After entering the alarm administration
password, press “#.” If an incorrect password is entered three consecutive times, the system
will automatically sound the alarm and lock the keyboard for 1 min. For security purposes, it
is suggested that the user change the password after entering the system for the first time
and properly secure the password.
After the protection setup administration authority is successfully verified, enter the
protection setup administration system. If there currently is an alarm input or latched alarm
input, the system will request to reset the alarm. The system will prompt the user to press
“#” to reset the alarm system, carry out protection setup or withdrawal
operation, press “#” to toggle between protection setup and protection
withdrawal and press “*” to exit and save the settings on exit. If carrying out protection
setup operation of the system, after exit, the system will enter protection setup delaying
state.
Under the protection setup operation mode, the Alarm In LED lamp 1-4 on the casing of the
controller will indicate four different states, see Table 4-1:
Table 4-1 States of Indicator Lamp
Yellow LED
System Protection State
Off
In protection withdrawal state
On
In protection setup state
Slowly blink
In protection setup delaying state
Rapidly blink
In protection setup state, and alarm triggered.
System Armed
[#] To Disarm
System disarmed
[#] to Arm
Alarm Reset?
[#] To Reset