7
6. Operating instructions
6.1 Overview
Figure 1: Overview
1 Charging socket
2 LED light ring (charge control)
3 Charging zone
4 Non-slip strips
5 Micro-USB B connector
6 USB connector
Place the induction charging station on an even surface, if possible. Plug the Micro-USB B
connector (Position 5 in the overview) of the charging cable into the socket of the induction
charging station (Position 1 in the overview).
Connect the USB connector (Position 6 in the overview) of the charging cable to a USB port of
your computer or with a USB charger. The induction charging station is now ready for use, this
can be seen by the lit red charge control lamp (Position 2 in the overview).
To charge, place your smartphone on the charging zone (Position 3 in the overview) of the
induction charging station. The charging process starts automatically, the charging control
lamp is now lit up in blue.
6.2 Use
The quick charge function is only available if the smartphone and the charger have
that function.
7. Maintenance and care
8. Notes regarding environmental protection
9. Contact information
The induction charging station is maintenance-free if used according to its intended purpose.
Clean the induction charging station with a soft, dry cloth only. Do not use cleaning agents.
Never allow liquids to get into the housing.
Do not dispose of electrical devices with household waste! Electrical and electronic scrap
must be collected separately and disposed of in an environmentally responsible manner
for recycling. Please contact your community or city administration regarding disposal
options for electrical and electronic scrap.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
