ETAS
Basic Safety Notices
ES430.1 - User’s Guide
10
2
Basic Safety Notices
This chapter contains information about the following topics:
• “General Safety Information” on page 10
• “Requirements for Users and Duties for Operators” on page 10
• “Intended uUe” on page 10
2.1
General Safety Information
Please observe the Product Safety Notices ("ETAS Safety Notice") and the fol
-
lowing safety notices to avoid health issues or damage to the device.
ETAS GmbH does not assume any liability for damages resulting from
improper handling, unintended use or non-observance of the safety precau
-
tions.
2.2
Requirements for Users and Duties for Operators
The product may be assembled, operated and maintained only if you have the
necessary qualification and experience for this product. Incorrect operation or
operation by users without sufficient qualification may lead to injuries or death
or property damages.
The safety of systems that are using the product is the responsibility of the
system integrator.
General safety at work
The existing regulations for safety at work and accident prevention must be
followed. All applicable regulations and statutes regarding operation must be
strictly followed when using this product.
2.3
Intended uUe
Application area of the product
This product was developed and approved for applications in the automotive
area. The module is suitable for use in interiors, in the passenger cell, in the
trunk, in the engine compartment or in the exterior area of vehicles.
For use in other application areas, please contact your ETAS contact partner.
TIP
Carefully read the documentation (Product Safety Advice and this User's
Guide) that belongs to the product prior to the startup.
