ETAS
Getting Started
ES430.1 - User’s Guide
48
6.2.4.1
Rules on Connecting the Modules on the DIN Rails using the
ES4xx Angle Bracket (left)
To be able to fasten the modules in the desired arrangement with the ES4xx
angle bracket (left) on DIN rails, observe the following rules:
6.2.4.2
Connect the Module with the ES4xx Angle Bracket (left)
Connecting the ES400 module with the ES4xx angle bracket (left) requires a
2 mm hex key (minimum length 20 mm).
Connecting the module and the ES4xx Angle Bracket (left):
1. Position the module to the right of the ES4xx angle bracket
(left).
2. Align the integrated assembly elements of the module with the
bores.
3. Insert the hex key in a hexagon head on the right side of the
module.
4. Screw the parts together by turning the hex key clockwise to
the stop within the module.
Both parts are now mechanically connected on one side.
5. Insert the hex key in the other hexagon head of the module.
6. Screw the parts together by turning the hex key clockwise to
the stop within the module.
Both parts are now completely connected mechanically.
TIP
The two integrated assembly elements are accessible only from the right side
of the module and can be rotated with a hex key.
For this reason, the module must always be screwed onto the ES4xx angle
bracket (left) from the right side.
Additional modules can only be screwed onto the right side of this module,
but not any module blocks.
TIP
Screw the two parts together without canting the threads!
TIP
Screw the two parts together without canting the threads!
