ETAS
Getting Started
ES430.1 - User’s Guide
42
Integrated Assembly Elements
Every ES400 module has two integrated assembly elements to enable different
assembly possibilities. If several modules are required in one location, they can
be connected quickly, without any additional parts, using the integrated assem
-
bly elements to form a measuring instrument block (cascading). The two inte
-
grated assembly elements also make it possible to screw the modules directly
onto other components (parts of the vehicle body, units).
Fig. 6
-
3
Accessing the Integrated Assembly Elements
You can access and use the two integrated assembly elements of a module via
the holes indicated (see Fig. 6
3 on page 42) on the right-hand side of the mod
-
ule.
Fig. 6
-
4
Unscrewed Integrated Assembly Elements
Openings for Cable Fasteners
Every module base has two openings each on the right and left-hand side for
attaching the modules to other components using cable fasteners.
Examples for mounting
Examples for mounting using the different possibilities to connect and attach
ES400 modules are:
• Connect ES400 modules with the integrated assembly elements (cas
-
cading)
• Attaching ES400 modules with the integrated assembly elements:
– on DIN rails with ES4xx angle brackets (left)
– on other components
• Attaching ES400 modules with screws:
– on DIN rails with ES4xx angle brackets (right)
– on other components
• Attaching ES400 modules with cable fasteners:
– on DIN rails with ES4xx angle brackets (left)
– on DIN rails with ES4xx angle brackets (right)
– on other components
