not activated, Run.GPS will compute speed and pace. This can make sense especially for
older devices.
Altitude correction
is only required for a few devices which output altitudes with a constant
value added or subtracted. Try automatic correction first if this is the case. Errors in altitude
measurement can be normal since GPS based altitude measurement is relatively inaccurate.
GPSID fix
: required only for the Mio A701; must not be activated on other devices – this
leads to the GPS coordinates being totally wrong (multiplied with about 0.01)
Configuration using serial (COM) port:
COM port and baud rate can be entered manually or
detected automatically. Automatic detection does not work
in all cases – if it doesn't, you should search the web or
other sources for the correct settings.
Use .Net COM port
: this setting makes sense only on very few
devices (e.g. “HP Ipaq 2200”). Please use only if required. On
incompatible devices this can “freeze” your device (e.g. “MDA
Compact III”).
Hint: if your device is “frozen” because you checked the “use .Net COM port” function, and
you cannot start
Run.GPS
any more, delete the file “My
Documents/Run.GPS/configuration.xml” to reset the
Run.GPS
configuration.
Some selected configurations can be found on the
Run.GPS
web site:
http://www.rungps.net/wiki/DeviceConfigurationEN
17
Содержание Run.GPS UV
Страница 1: ...Manual for Run GPS Trainer UV and Run GPS Trainer UV Pro Version 2 4 1 August 1st 2012 1...
Страница 33: ...33 Wikipedia Guide always shows the Wikipedia article located closest to you...
Страница 112: ...7 Go to directory Storage Card My Documents and paste the previously cut out Run GPS directory here 8 Start Run GPS 112...