eSymetric Run.GPS UV, Руководство пользователя

Страница: 64 / 116

4.12.Automatic Lap Detection
A lap is a defined part of your training track for which you can get the same training
parameters as for the whole track. It doesn't necessarily have to end at the same point where
it started.
4.12.1.New Lap When Target Is Crossed
The idea behind that function is that Run.GPS automatically starts a new lap whenever you
cross a certain position. You may use this feature when running on a cinder track or track
driving with a race car. Afterwards you can compare your lap times and speeds etc.
How does it work?
Basically, you have to define the spot where the start/finish line is by setting the navigation
target to that position (route end point or placemark). Whenever you
cross the navigation target - a new lap is started.
Procedure
First, you need to enable automatic lap detection. To do this, go to
Main Menu > Configuration > General Settings > Lap Detection and
check the “when crossing target” option.
After that, go to the start/finish line or the place where a new lap should be started. If you
don't have a route or placemark yet, create a new placemark selecting Main Menu >
Placemarks > New:
If your GPS signal is valid, the coordinates are filled in
automatically.
Select the placemark as navigation target.
64