eSymetric Run.GPS UV, Руководство пользователя

Страница: 18 / 116

3.2.GPS Status
The GPS status window can be opened by either pressing the GPS status button in the
control bar or by selecting „GPS Status“ from the main menu.
The diagram shows the current positions of the GPS
satellites found. Satellites with sufficient signal
strength are marked green.
All info displays can be changed by holding the
buttons for about 2 seconds.
GPS Dilution: also “Dilution of Precision”, “DOP”; this
values expresses the suitability of the current satellite
constellation for position determination; values from 1
to 6 are good, for values greater 10 the position can
not be determined
The GPS device can be connected or disconnected
trough this dialog. Disconnecting the GPS can be
wise for instance when taking a rest (because the
GPS consumes really much battery power).
3.3.GPS Setup on a Pocket PC with Built-in GPS
If you call a PDA with built-in GPS your own, getting it connected to Run.GPS should be
relatively easy. Sometimes, though, the parameters have to be found by exhausting
investigation.
1. First try to connect your GPS using „Windows managed“ GPS
2. If that does not work, try to scan the COM ports („Detect COM Settings“)
3. If that also fails, try searching the web for the correct settings
Hint : From Windows Mobile 5, there is a dialog „GPS“ in the
system settings. Among other things the GPS hardware port can
be found there.
In most cases the hardware COM port has to be used.
18