E-S 500 / 502 Classic Series Instruction Manual
Easy Wiring Under Driveway
3.4
This portion of the manual will explain how to create
an easy conduit for the wires
for dual gates.
This is what you would need to get started:
- Narrow shovel.
- ¾’ water pipe no more that 5’ in length (you would
need a total number of pipes that would equal your
driveway width plus 1’)
- ¾’ electric rigid pipe couplings (one for each joint in
the water pipe)
- 1 ¾’ “Tee”
- 1 ¾’ Plug.
- 1 ¾’ male galvanized pipe X female hose fitting
(usually in Brass)
- Large hammer.
All the above items could be found in a local
home supply store.
Dig a trench perpendicular to the driveway ap-
proximately 6 to 8 inches deep and 6’ long.
Hook up a typical garden hose assembled to
the first length of pipe as shown.
Turn on water and push the pipe under the
driveway, matching the pitch of the driveway. If
you hit a rock use the hammer to force the pipe
past the rock.
Attach additional pieces of pipe to the initial
length by removing the tee and using the cou-
pling to add the additional length of pipe, reas-
semble the tee and repeat the above steps until
only 6 inches of pipe is sticking out from under
the driveway. On the opposite side of the drive-
way look for a wet spot or water bubbling up,
dig to find the end of the pipe.
Содержание E-S 500
