E-S 500 / 502 Classic Series Instruction Manual
Manual Operation
2.1
1) Lift lock cover cap off.
2) Insert and turn provided key.
3) The operator can now be pull or push
open.
4) Replace lock cover to protect lock
from water and debris.
To exit manual mode, repeat the
above steps.
Restoring Automation
To maintain the proper performance of your emergency release -
please perform the following service for your motor once per year.
1. Remove the emergency release cap
2. Spray some WD-40 or other spray lubricant into the release lock.
3. Allow the lubricant to soak in.
4. Apply a liberal dab of petroleum
based jelly or wheel bearing
grease to coat the release lock.
5. Put the cap securely back in
place.
Содержание E-S 500
