PART NO: MS0104. REVISION 1 - MAY 2017
These instructions are intended for professional garage door installers. All references are taken from inside looking out.
Auto-Lock Kit
Panelift
®
Storm-Shield
™
installation instructions
PART NO: MS0104
important safety instructions
WARNING!
• DO NOT attempt to disassemble, repair or modify
the product. This will invalidate the warranty.
• DO NOT allow children to play with the Auto-Lock.
• Not suitable for garages that have only one exit.
• DO NOT cover, paint or lubricate the product.
CAUTION!
Fall from ladder
• Ensure ladder is the correct type for job.
• Ensure ladder is on flat ground.
• Ensure user has 3 points of contact while on ladder.
Burns
• DO NOT handle damaged or leaking batteries
• The Auto-Lock Kit contains sealed lead-acid
batteries that must be disposed of properly at the
end of their useful life.
WARNING!
This device will slide a bolt into the guide track
automatically when the door is closed. Not
suitable for garages that have only one exit.
For emergency lock/unlock press the button on
the Auto-Lock. This will disengage the lock from
the guide track and allow you to disengage
the opener and open the door. The lock
will automatically re-engage after the next
complete cycle.
It is our strong recommendation that your
opener be fitted with SAFETY BEAMS. Safety
Beams detect any obstructions in the door/
gate’s path and override automatic operation
if one presents. These must be installed as in
accordance with AS/NZS 60335-2-95:2012.
standard installation
garage door lock - order no. MC-0002
item
description
qty
1
garage door lock (includes battery)
1
2
mounting plate MC0048
1
3
bracket striker MC0010
1
wireless WBS-1V1 kit 1 order 14827
5
wireless wbs-1v1 Ay
1
6
wbs harness 90mm Ay
1
7
wbs harness 400mm Ay
1
8
taptite screw “p”
2
9
velcro 20 x 50
1
mounting screw pack GdL100 order 61411
10
bolt 1/4” - 20Tpi - uNCx1/2” sq neck
3
11
nut ser flng 1/4” x 20-Tp1 uNC zN
3
12
screw tek 14g-20x25 flng hD CL4
4
13
taptite screw MshR head “p” M6 x 13
2
installation
