Essilor Neksia, Руководство пользователя

Страница: 57 / 84

9. Movement of the GCD module
10. Transfer initialization
11. Door
12. Water test
◦ trough spraying
◦ door spraying
1. Select the autotest to be carried out.
2. Press to start the test cycle.
To interrupt the cycle at any time, press .
> The result is displayed on the right of the icon of the autotest carried out:
◦ The equipment is operational.
◦ A malfunction has been detected, a description is displayed in the message box on the right.
2. C
HECKS AND CALIBRATION
If there is any misalignment or you encounter difficulties in using the touch screen
You can:
• check the calibration on the position of the feelers in the trough
(
F
p.57)
• calibrate the touch screen
(
F
p.59)
.
If the edger detects a variation, an adjustment is carried out during the cycle.
Have the plastic calibration gauge to hand.
a. Calibrating the feelers
If the beveling or chamfering are misaligned, the edger may need to be recalibrated.
You can calibrate the position of the feelers in the trough.
During the feeler calibration cycle, the edger factors in the wear on the feelers since the last
calibration and makes an adjustment to offset any difference.
Have the plastic calibration gauge to hand.
Press > > to access the calibration menu.
The following screen is displayed:
U
SER
M
ANUAL
> IV. M
AINTENANCE
&
SERVICING
57
Neksia > v1.0 - 02.14