Essilor Neksia, Руководство пользователя

Страница: 24 / 84

The shape is displayed on the edger work screen.
After the tracing of a rimmed frame:
• The bevel finish is selected by default.
• The automatic mode is selected by default.
Select lens material.
Change the edging mode. Press to select customized mode .
Select the type of cycle.
Choose whether or not to polish and/or chamfer your lens.
For more information, refer to the section Edging a lens > Polishing
(
F
p.39)
and Edging a lens >
Chamfering
(
F
p.40)
.
Press .
The door closes, the lens is clamped and then felt.
The customized bevel finish screen is displayed.
Select the type of customized bevel you want to do.
To avoid reproducing defects when tracking a frame rim, check that the frame groove is in perfect
condition and that the hinges are properly closed. All groove imperfections will be reproduced.
Press and to adjust the distribution value if required.
Press .
The edging cycle starts.
When the edging cycle is finished, the retouch screen is displayed.
Press to release the lens.
Neksia > v1.0 - 02.14
24
U
SER
M
ANUAL
> II. E
DGING A LENS
>
>
>
>
>
>
2
3
4
5
6
7
8
9
10