Essilor Neksia, Руководство пользователя

Страница: 10 / 84

Options
• Trimaterial edger for chamfering glass lenses
• Barcode reader
• Roll of barcode labels
• Open or closed circuit spraying kit
Connection accessories
• Power cable
• RJ45 cable for the tracer-edger connection
• Wastewater evacuation pipe with attachment ring
2. U
SING THE EDGER
In this section, you will find all the information concerning the following:
• Turning the edger on
(
F
p.10)
and off
(
F
p.10)
• The use of the touch screen and the keyboards
(
F
p.11)
,
• The description of the work screens of the edger
(
F
p.12)
.
a. Turning on the edger
To switch on the edger, press the main switch located on the top of the machine.
The edger will initialise.
On the edger screen, press the icon to complete the initialization phase.
A beep indicates that the initialisation was successful.
The edger is ready for use when the initial screen is displayed.
b. Switching off off the edger
Before switching off the edger:
• check that there is no lens in the trough
• check that the lens clamp shafts are loosened and that the trough door is open
• select the edging screen
Select then .
A confirmation message is displayed on each screen.
Select to confirm.
The edger will switch off.
Neksia > v1.0 - 02.14
10
U
SER
M
ANUAL
> I. F
IRST STEPS
>
>
>
>
1
2
1
2
3