Essilor Neksia, Руководство пользователя

Страница: 21 / 84

a. Automatic beveling
Call the desired shape located on the tracer.
The shape is displayed on the edger work screen.
After the tracing of a rimmed frame:
• The bevel finish is selected by default.
• The automatic mode is selected by default.
Select lens material.
Select the type of cycle.
Choose whether or not to polish and/or chamfer your lens.
For more information, refer to the section Edging a lens > Polishing
(
F
p.39)
and Edging a lens >
Chamfering
(
F
p.40)
.
Press .
The door closes, the lens is clamped, then the feeling operation starts.
The edging cycle starts.
When the edging cycle is finished, the retouch screen is displayed.
Press to release the lens.
If necessary, retouch the lens.
Otherwise, start edging the second lens. Select the lens directly on screen, on the left or right of the
work area.
The edging screen for the second lens is displayed. All finishes chosen and the modifications made
are kept.
U
SER
M
ANUAL
> II. E
DGING A LENS
21
Neksia > v1.0 - 02.14
>
>
>
>
>
>
1
2
3
4
5
6
7