Essilor Neksia, Руководство пользователя

Страница: 17 / 84

◦ Trivex lens TM
◦ Glass lens
◦ Tribrid lens TM
The configuration of the edging cycles depends on the type of material. An incorrect choice may result in
material damage.
4. Type of finish
◦ Bevel
◦ Groove
◦ Flat-edge
5. Drilling
◦ Drilling enabled
◦ Drilling disabled
6. Edging mode
◦ Automatic mode
The finish parameters are automatically calculated according to the information acquired when
tracing the frame and feeling the lens.
◦ Customized mode
The finish settings can be fully customized.
7. Type of cycle
◦ Standard cycle
For all types of materials.
◦ 2-star cycle
For all types of materials. This cycle offers a more sophisticated edging mode than the standard
cycle, dedicated to thin lenses or hydrophobic lenses.
8. Polishing
◦ Polished lens
◦ Non-polished lens
9. Front surface chamfering
◦ Thin chamfer
◦ Thick chamfer
◦ No chamfering
10. Rear surface chamfering
U
SER
M
ANUAL
> II. E
DGING A LENS
17
Neksia > v1.0 - 02.14