Essilor Neksia, Руководство пользователя

Страница: 51 / 84

◦ Metal
◦ Plastic
◦ Optyl
◦ Drilled / Grooved / Flat
2. Lens materials
◦ Plastic
◦ Polycarbonate
◦ MHI
◦ Trivex TM
◦ Glass
◦ Tribrid TM
3. Adjust the lens diameter
a. Press the value to be modified.
> The numeric keypad is displayed.
b. Enter the new value.
◦ Negative value: the diameter will be smaller
◦ Positive value: the diameter will be larger
c. Press on to confirm.
Once the change has been made, press to return to the work screen.
b. Adjusting the position of the bevel and groove
After edging a lens, if the position of the bevel or groove always seems too close to the front or rear surface,
you can adjust it.
To access that menu from your edger work screen, select > > .
The following screen is displayed:
1. Default bevel position
◦ Press to move the bevel towards the front surface of the lens.
◦ Press to move the bevel towards the rear surface of the lens.
2. Default polished bevel position
U
SER
M
ANUAL
> III. C
ONFIGURING THE EDGER
51
Neksia > v1.0 - 02.14