Essilor Neksia, Руководство пользователя

Страница: 38 / 84

◦ Customized
2. Select the drilling points
◦ Nasal side
◦ Temporal side
◦ All drilling points
3. Modify the selected value
4. Modify the diameter
◦ diameter (mm)
◦ difference between the initial value and the modified value
5. Modify the drilling angle
◦ drilling angle (degrees)
◦ difference between the initial value and the modified value
6. Cross-sectional view
Cross-sectional view of the lens after the feeling cycle, showing the angle of the drill bit at the selected
drilling point.
7. Reminder of size reduction / increase applied to lens diameter
8. Navigation
◦ Stop the cycle
◦ Return to the main edging screen without saving your changes
◦ Start the cycle
c. Customized drilling
Call the desired shape located on the tracer.
The shape is displayed on the edger work screen.
After the tracing of a shape with drilling settings:
• The drilling function is selected by default.
• The automatic mode is selected by default.
Select lens material.
Change the edging mode. Press to select customized mode .
Neksia > v1.0 - 02.14
38
U
SER
M
ANUAL
> II. E
DGING A LENS
>
>
1
2
3