Esko Kongsberg XP, Руководство пользователя, Страница: 81 / 218

12
Kongsberg XP
How to replace a Knife Blade
Warning: Sharp tool
This picture shows how the Knife Blade
is aligned using two Guide Pins (a and b)
beneath the blade clamping.
1. Loosen the two screws (b) of the
Knife Blade clamping.
2. Carefully remove the blade (a).
3. Insert a new Knife Blade and make
sure that it is aligned with the Guide
Pins (c).
4. Mount the new tool. (Note the
position of the Guide Pin ).
5. Ensure that the tool height is
calibrated on the Measuring Station .
About Tool Adjustment
• For the V-notch Knife , we recommend the manual procedures for Tool Rotation and Center Offset
adjustment.
• When adjusting Tool Rotation and Center Offset , use a thin Folding Carton material.
• Remember that you should look at the bottom side of the material for correct alignment.
• The adjustment depends upon the actual material due to weight, structure and thickness.
• For optimal result, a fine tuning of the adjustments in the actual material should be carried out.
For this Tool , complete the following adjustments:
Adjustment Description
Lag Setting The Knife Lag depends upon the Blade Adapter .
Nominal value is 0-7 mm.
Tool Height Measured automatically, possible to add an Offset Value
Tool Rotation Adjust Tool Angle tangential to Moving Direction .
81