Esko Kongsberg XP, Руководство пользователя

Страница: 116 / 218

12
Kongsberg XP
• Follow the Vacuum Cleaner filling level
carefully.
• Empty the container before the level reach the
inlet position (indicated in red).
Suction house
Always, when executing a job, let the suction house float on top of the material.
In addition to chip removal, the suction house reduces the risk of being hit by small work pieces or by a
broken milling bit .
Warning : Regularly inspect and clean the suction house to prevent it from clogging. Failing to do
so could in worst case result in a fire when a hot milling bit is in contact with the debris.
Ejection of parts
There is a potential risk that personnel can be hit by breaking milling bits or small pieces of processed
material. Therefore, eye protection must be used by any personnel working with milling.
• Always use eye protection when working with
milling.
Hearing protection
The noise generated by milling varies with the material being processed and running parameters.
Hearing protection is highly recommended and may even be mandatory.
Spindle speed
Never use speeds higher than recommended by the bit supplier. Special care should be taken when
using bits with cutting diameter larger than shank diameter.
Milling bits
116