Esko Kongsberg XP, Руководство пользователя, Страница: 72 / 218

11
Kongsberg XP
The purpose of the calibration is to make sure the
accuracy of the knife angle is optimal
Manual notch angle Offset
Machine Connection -> Tool configuration -> Adjust Active Tool -> Manual Adjustment
An extra manual adjustment of the notch angle is possible. Please note that this offset will be added to
the calibrated value found in the automatic calibration procedure.
1. From Machine Connection -> Tool Configuration -> Select the VariAngle unit
2.
Click the Adjust Active Tool button
3. Select Manual Adjustments then click Next
4. Go to the notch angle area
5. Enter a positive or negative value in the Zero Offset (degrees) box, or use the up/down arrows
6.
Click Activate and then Finish to store the offset
11.10. Maintain Tool List
Machine Connection -> Configure Tools -> More ...
The More ... dialog contains selections to Ignore , Delete or Add to the Tool List .
The Tool List contains Tools that you can select for the available Tool Positions .
Ignore Automatic Tool Identification
Ignore Automatic Tool Identification may be used when the Automatic Tool Detection fails, and
manual tool selection is necessary.
If
Ignore Automatic Tool Identification is checked, Tool Setup remains unchanged after:
• Table Zero Position sequence
• Identify Tools function
72