Esko Kongsberg XP, Руководство пользователя

Страница: 104 / 218

12
Kongsberg XP
26 mm / 1.02 in.
28 mm / 1.10 in.
30 mm / 1.18 in.
Material thickness and notch
angle
12.9.5. Tool adjustment
Unique adapter identification
The adapters are recognized by the machine, and the VariAngle unit will have different adjustment
values for each adapter.
Unique VariAngle calibration
The VariAngle unit introduces a new calibration; the Notch Angle Calibration . This calibration
will automatically run when the cutting table starts. It can also be accessed through the Tool
configuration dialog.
Adjustment Description
Notch Angle Calibration This is calibrated automatically at first-time use. It can also be re-
calibrated by wizard.
Lag setting The nominal value for the Standard adapter is 19 mm / 0.75 in. The
optional long adapter for short knife blades has a nominal value of
9.7 mm / 0.38 in.
Note: The Lag setting can be used to adjust overshoot and lead-in
of cutting lines.
Tool Height This is measured automatically. It is possible to add an offset value.
Note: In the Tool Height dialog, you can also specify a notch angle .
This can be used to complete a test cut in the selected angle.
Tool rotation This is for aligning the tool with the moving direction.
Center offset This is for aligning the tool with the cutting path.
Notch angle offset This is for obtaining the correct notch angle .
Tool Offset This is for aligning tool position with laser pointer or camera.
104