ESAB ET 186i AC/DC
Manual 0-5425 3-17 INSTALLATION, OPERATION AND SETUP
3.13 Specification for TIG Torch
1. SPECIFICATION FOR TIG TORCH PART NO: W4013600 TO SUIT ESAB ET 186iAC/DC
TIG Torch Contents include:
1 x 26 TIG Torch with Long Back Cap, 12.5 ft lead length, 10.5" gas hose length, 9.5" control lead with 8 pin plug and Rigid Head.
Remote Control Cartridge, Potentiometer with integrated on/off switch (installed).
A-11556_AB
NOTE!
The additional switches/controls below are interchangeable with the installed control in the TIG torch.
ART# A-11587
Control module with
push button on/off
switch only.
Control module with
push button on/off switch
with roller potentiometer.
Control module with
roller potentiometer and
integrated on/off switch.
Additional On/Off Switch Cartridge in a Sealed Plastic Bag.
Additional On/Off Switch-Remote Amperage Control Cartridge in a Sealed Plastic Bag (NOTE: You will not be able to view the pre-
set amperage on the power source with this control, amperage will not be viewable until the arc is initiated).
A-11557_AB
1 x Accessory Kit containing 1 x Short Back Cap, 1 x Collet Body 1/8" (3.2mm),
1 x Collet Body 3/32" (2.4mm), 1 x Collet Body 1/16" (1.6mm), 1 x Collet 1/8" (3.2mm), 1 x Collet 3/32" (2.4mm), 1 x Collet 1/16"
(1.6mm), 1 x Nozzle Alumina No5, 1 x Nozzle Alumina No6, 1 x Nozzle Alumina No7, 1 x Tungsten Electrode 1/8" (3.2mm) Thoriated
Type (red band), 1 x Tungsten Electrode 3/32" (2.4 mm) Thoriated Type (red band) and 1 x Tungsten Electrode 1/16" (1.6mm)
Thoriated Type (red band).
