5.
When the cleaning cycle is finished, you can check to see if the nozzles are clean; click
Print Nozzle
Check Pattern
and click
.
6.
Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click
Finish
.
• If there are gaps or the pattern is faint, click
Clean
to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait
at least 6 hours. Then check the print head nozzles and try cleaning the print head again, if necessary. If
quality still does not improve, contact Epson.
Parent topic:
Related tasks
Cleaning the Print Head Using the Product Control Panel
Flushing the Ink Tubes
You can run
Power Ink Flushing
to clear the print head nozzles if necessary.
Note: Power Ink Flushing
may shorten the maintenance box service life.
1.
Turn off the product.
2.
Press and hold the
back button while pressing the
power button to turn the product back on.
You see a message asking if you want to run
Power Ink Flushing
.
267
Содержание WF-R4640
