Epson Stylus Color 880, Руководство по обслуживанию

Страница: 23 / 179

EPSON Stylus COLOR 880 Revision A
PRODUCT DESCRIPTION OPERATOR CONTROLS 23
1.4.4 Printer Condition and Panel Status 1.4.5 Printer Initialization
There are three kinds of initialization methods, and the following explains each
initialization.
1. Power-on Initialization
This printer is initialized when turning the printer power on, or printer
recognized the cold-reset command (remote RS command).
When printer is initialized, the following actions are performed:
(a) Initializes printer mechanism.
(b) Clears input data buffer.
(c) Clears print buffer.
(d) Sets default values.
2. Operator Initialization
This printer is initialized when turning the printer power on again within 10
seconds from last power off, or printer recognized the -INIT signal
(negative pulse) of parallel interface.
When printer is initialized, the following actions are performed:
(a) Cap the printer head.
(b) Eject a paper.
(c) Clears input data buffer.
(d) Clears print buffer.
(e) Sets default values.
3. Software Initialization
The ESC@ command also initialize the printer.
When printer is initialized, the following actions are performed:
(a) Clears print buffer.
(b) Sets default values.
Table 1-12. Printer Condition and LED Status
Printer Status
Indicators
Priority
Power
Ink Out
(Black)
Ink Out
(Color)
Paper Out
Power On Condition On - - - 9
Ink Sequence Blink - - - 6
Ink Cartridge
Replacement Mode
Blink - - - 5
Data Processing Blink - - - 8
Paper Out - - - On 4
Paper Jam Condition - Off Off Blink 3
No Ink Cartridge / Ink
End (Black)
- On - - 7
Ink Level Low (Black) - Blink - - 7
No Ink Cartridge or
Ink End (Color)
- - On - 7
Ink Level Low (Color) - - Blink - 7
Enter EEPROM and
Timer IC Reset
- ON (for 1 second only) -
Maintenance
Request
Blink Blink Blink Blink 2
Fatal Error Blink On On Blink 1