Epson Stylus Color 880, Руководство по обслуживанию

Страница: 137 / 179

EPSON Stylus COLOR 880 Revision A
Adjustment Individual service adjustment program feature 137
5.4 Individual service adjustment program
feature
This program menu is almost the same as the previous adjustment program.
However, it also enables various information to be acquired, and individual
settings to be made. This program is equipped with the following functions that
are not available in the sequential repair service program.
†
EEPROM check function
You can check the EEPROM data or can write down the specific data into the
EEPROM directly by using this function. However, this function is available only
on the normal condition. If any error occurs, this function can not be used because
this program runs under the IEEE 1284 Nibble mode, not the D4 mode.
†
Refurbishment for DOA
This function charge the cleaning liquid into the printhead cavity and eject the
cleaning liquid to the waste drain ink pad. By this operation, the printhead and cap
assembly is cleaned. Prepare the dummy ink cartridge and S46 cleaning liquid,
injector before use this program.
Depending on the situation, use the individual adjustment program. In this
section, we will explain only the important item and notice about the usage of
this program.
5.4.1 Head cleaning function
This printhead cleaning is CL1’and about 1/13 of the brand-new black I/C and
1/16 of the brand-new color I/C are consumed. Before use this function, check
the remaining ink amount of the both I/C by using printer driver.
5.4.2 Initial ink charge function
This function consume about 1/5 of the brand-new black I/C and 1/7 of the
brand-new color I/C. Before use this function, check the remaining ink amount
of the both I/C by using printer driver. So, do not use this function frequently.