Epson Stylus Color 880, Руководство по обслуживанию

Страница: 136 / 179

EPSON Stylus COLOR 880 Revision A
Adjustment Sequential Repair Service Program feature 136
5.3.7 Printer mechanism replacement
When you change the printer mechanism in your service, use this function.
NOTE:
Use the function for the following case.
* Printer mechanism (except the waste drain ink pad and circuit board,
printhead) is changed with other one
1) Click the “Printer mechanism replacement” in the Sequential repair service
program.
Following menu is displayed.
Figure 5-40. Printer mechanism replacement
2) Follow the adjustment item displayed on the above menu.
For the detail, refer to Section 5.3.3 on page 129 due to the adjustment
item and order are same as “Printhead replacement”.
5.3.8 Waste ink pad replacement
When the Waste drain ink pad is replaced with new one due to the
maintenance error, you have to replace the Waste drain ink pad with new one
and reset the counter.
NOTE: This function is available only before the Waste Ink Pad Overflow Error
occurs. When the Waste ink Pad Overflow Error occurs, you have to reset
the Protector counter with the Panel Reset Operation.
1) Turn off the printer and replace the Waste drain ink pad with new one.
Click the “Waste ink pad replacement” in the sequential repair service
program and use the following function. Clicking the “OK” button. .
Figure 5-41. Waste drain ink pad replacement
2) Following message is displayed. Click “Yes” button clears the counter in
the EEPROM. The suitable waste drain ink pad life is set in the EEPROM
automatically according to the market setting of the initial setting menu.
Figure 5-42. Warning message