Epson LQ 670 - B/W Dot-matrix Printer, Руководство по обслуживанию

Страница: 115 / 135

Chapter 6 Maintenance
Rev. A
6-1
6.1 Preventive Maintenance
Preventive Maintenance is important to keep the printer in the best condition and to prevent troubles in
advance. Use the denatured alcohol to clean the exterior case and use the vacuum cleaner if necessary,
to remove dust and paper debris in the printer inside.
CAUTION
;
Do not use thinner, trichloroethylene, or ketone-based solvents on the plastic components of the
printer.
;
Never use the oil and the grease other than those specified in this manual, and using different type
of lubrication can damage the printer and the components.
;
Disconnect the printer from the AC socket before performing maintenance.
The influence that grease and oil give is great and especially in low temperature. Therefore, EPSON has
been tested and analyzed various grease and oil extensively and chooses the best one for that printer.
Type Name Quantity Availability Part No.
Grease G-26 40g EPSON B702600001
Oil O-8 40cc EPSON 1019753
Ref. No. Lubrication Points Lubricant
1 Contact area of the frame, base, shaft and release G-26(3-5mg)
2 Contact area around the gear 20 of the release lever G-26(3-5mg)
3 Contact area of ratchet and RD carriage unit (2points) G-26(3-5mg)
4 Side of shafts for sending ribbon in the carriage unit (3points) G-26(3-5mg)
5 Oil pad O-8 (0.3cc)
6 The platen gap adjustment slots on the right frame G-26(2mm width)
7 Contact area of carriage unit guide, CR G-26(3-5mg)
8 60mm from the left edge of CR guide rack G-26(2mm width)
9 Rack parts of the CR guide (3 points) G-26(3-5mg)
10 Gear teeth of the gear18 and 36 G-26(3-5mg)
Table 6-1. Lubrication
Table 6-2. Lubrication Points