Epson LQ 670 - B/W Dot-matrix Printer, Руководство по обслуживанию

Страница: 13 / 135

LQ-670 Service Manual
Rev. A
1-6
1.2.4 Paper Specification
This section describes printable area and types of paper that can be used in this printer.
‰
Cut Sheets
The following table shows specification for cut sheets.
Front Entry(Manual Insertion) Rear Entry(CSF bin1) Rear Entry(CSF bin2)
Minimum Maximum Minimum Maximum Minimum Maximum
Width (inch) 3.6 11.7 3.9 11.7 3.9 11.7
(mm) 91 297 100 297 100 297
Length (inch) 3.5 16.5 3.6 16.5 8.3 16.5
(mm) 90 420 92 420 210 420
Thickness(inch) 0.0025 0.0055 0.0025 0.0055 0.0025 0.0055
(mm) 0.065 0.14 0.065 0.14 0.065 0.14
Weight (g/m
2
) 52 90 52 90 52 90
(lb) 14 24 14 24 14 24
Quality Plain paper, Reclaimed paper, Not curled, not folded, not crumpled.
Note): Printing on reclaimed paper is available only under the normal temperature and humidity condition.
Front Entry (Manual Insertion) Rear Entry (CSF)
Minimum Maximum Minimum Maximum
Width (inch) 3.6 11.7 3.9 11.7
(mm) 91 297 100 297
Length (inch) 3.5 16.5(11.7) 3.6 16.5
(mm) 90 420(297)
( ):Value of line
glue one side of
form.
92 420
Copies 1 or 4 copies 1 or 4 copies
Total thickness (inch) 0.0047 0.015 0.0047 0.015
(mm) 0.12 0.39 0.12 0.39
Weight (g/m
2
) 40 58 40 58
(one sheet of multi part) (lb) 12 15 12 15
Quality Plain paper, Reclaimed paper
Not curled, not folded, not crumpled Plain paper, Reclaimed paper
Not curled, not folded, not crumpled
Jointing Line glue at the top or one side of
form Line glue at the top of form
Note): Printing on multi part. Don’t use CSF 2nd bin.
Table 1-7. Cut Sheet (Single sheet, Not Multi Part)
Table 1-8. Cut Sheet (Multi Part)