epm CIG 300 compact TMS, Руководство по эксплуатации

Страница: 432 / 474

epm
Maintenance, Service
December 2004 Edition
Operating Manual CIG compact TMS Duplex Automatic Soldering Machine Page 8-3
8.1 Introduction
8.1.1 Personnel Qualifications
The plant may only be maintained and repaired by professional technical personnel
or those with comparable knowledge of the mechanical, pneumatic and electrical
aspects. Training or instruction by the EPM Handels AG company or by persons au-
thorized by it is absolutely necessary.
Simple maintenance tasks (cleaning, changing the solder reel, changing the flux bar-
rel etc.) can be carried out by the operating personnel, during these tasks, however,
plant parts or protective devices must not be removed using tools under any cir-
cumstances.
8.1.2 Safety Specifications
STOP - keep residual dangers in mind:
First read Chapter 2 “Safety” and follow all the danger instructions given in it.
STOP - Follow the general safety specifications:
In addition to the safety specifications in chapter 2, the technical safety specifica-
tions (pneumatic system, gas, electrical system etc.) as well as the country-specific
and region-specific specifications must be followed.
STOP - Switch off energy:
Carry out the work only after disconnecting the energy supply. Switch off the plant
at the main switch. Secure the main switch with your personal padlock. Switch off
the air and gas.
Chapter 4 shows where the energy sources can be switched off.