Enterasys 1G58x-09, Руководство по настройке

Страница: 749 / 808

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-67
14.3.5.2 set pwa
Use this command to enable or disable port web authentication.
set pwa { enable | disable }
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable port web authentication:
Quiet Period Amount of time a port will be in the held state after a user
unsuccessfully attempts to log on to the network. Default
value of 60 can be changed using the
set pwa quietperiod
command as described in Section 14.3.5.14 .
MaxReq Maximum number of log on attempts allowed before
transitioning the port to a held state. Default value of 2 can
be changed using the
set pwa maxrequests command as
described in Section 14.3.5.15 .
NOTE: Port Web Authentication cannot be enabled if either MAC authentication or
EAPOL (802.1X) is enabled. For information on disabling 802.1X, refer to
Section 14.3.2.8 . For information on disabling MAC authentication, refer to
Section 14.3.3.3 .
enable | disable Enables or disables port web authentication.
Matrix> set pwa enable
Table 14-7 show pwa Output Details (Continued)
Output What It Displays...