Enterasys 1G58x-09, Руководство по настройке

Страница: 703 / 808

Security Configuration Command Set
Configuring 802.1X Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-21
14.3.2.4 set dot1x auth-config
Use this command to configure 802.1X authentication.
set dot1x auth-config {[ authcontrolled-portcontrol { auto | forced-auth |
forced-unauth }] [ keytxenabled { false | true }] [ maxreq value ] [ quietperiod
value ] [ reauthenabled { false | true }] [ reauthperiod value ] [ servertimeout
timeout ] [ supptimeout timeout ] [ txperiod value ]} port-string
Syntax Description
authcontrolled-
portcontrol auto
|
forced-auth |
forced-unauth
Specifies the EAPOL port control mode as:
•
auto - Auto authorization mode. This is the default mode
and will forward frames according to the authentication
state of the port. For details on this mode, refer to
Table 14-2 .
•
forced-auth - Forced authorized mode, which disables
authentication on the port.
•
forced-unauth - Forced unauthorized mode, which
filters and discards all frames received on the port.
keytxenabled
false
| true
Enables ( true ) or disables ( false ) 802.1X key transmission.
maxreq value Specifies the maximum number of authentictation requests
allowed. Valid values are
1 - 2147483647 .
quietperiod value Specifies the time (in seconds) following a failed
authentication before another attempt can be made. Valid
values are
1 - 2147483647 .
reauthenabled
false
| true
Enables ( true ) or disables ( false ) reauthentication control.
reauthperiod
value Specifies the time lapse (in seconds) between attempts to
reauthenticate a port. Valid values are
1 - 2147483647 .
servertimeout
timeout Specifies a timeout period (in seconds) for the
authentication server. Valid values are
1 - 2147483647 .