Enterasys 1G58x-09, Руководство по настройке

Страница: 685 / 808

Security Configuration Command Set
Configuring RADIUS
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-3
14.3 SECURITY CONFIGURATION COMMAND SET
14.3.1 Configuring RADIUS
Purpose
To perform the following:
•
Review the RADIUS client/server configuration on the device.
•
Enable or disable the RADIUS client.
•
Set local and remote login options.
•
Set primary and secondary server parameters, including IP address, timeout period, and number
of user login attempts allowed.
•
Reset RADIUS server settings to default values.
•
Configure a RADIUS accounting server.
Commands
The commands needed to review and configure RADIUS are listed below and described in the
associated section as shown:
•
show radius ( Section 14.3.1.1 )
•
set radius ( Section 14.3.1.2 )
•
clear radius ( Section 14.3.1.3 )
•
show radius accounting ( Section 14.3.1.4 )
•
set radius accounting ( Section 14.3.1.5 )
•
clear radius accounting ( Section 14.3.1.6 )
For an overview on working with Host Access Control Authentication (HACA), refer to
Section 14.4.1 .