Enterasys 1G58x-09, Руководство по настройке

Страница: 787 / 808

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-105
14.3.9.2 set flowlimit
Use this command to enable or disable flow setup throttling globally or on one or more port(s), or
to re-enable one or more port(s) that were disabled due to flow setup throttling.
set flowlimit {[ system | port-string disable | enable ] [ port-string operational ]}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Flow limit
shutdown Whether flow limit shut down is enabled or disabled.
Default state of disabled can be changed with the
set
flowlimit shutdown command ( Section 14.3.9.6 ).
Flow limit
notification
interval Interval in seconds at which an SNMP notification will be
sent when a specified flow limit is reached. This function
can be enabled, and the default interval of 120 can be
changed, with the
set flowlimit notification command
( Section 14.3.9.7 ).
Flow limit
maximum
flowcount Number of flows that, if exceeded, will trigger a configured
action. Set using the
set flowlimit limit command
( Section 14.3.9.3 ).
Flow limit table Lists flow limits and assigned actions for FST port
classifications.
system |
port-string
disable
| enable
Enables or disables FST globally or one specific port(s).
port-string
operational Re-enables one or more ports disabled by the flow limit
shut down function (as described in
Section 14.3.9.6 ).
Table 14-8 show flowlimit Output Details (Continued)
Output What It Displays...