Enterasys 1G58x-09, Руководство по настройке

Страница: 89 / 808

General Configuration Command Set
Setting Basic Device Properties
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-41
Command Mode
Read-Write.
Example
This example shows how to show terminal information:
3.2.2.14 set terminal
Use this command to set the number of columns and rows for the terminal connected to the device’s
console port.
set terminal { rows num-rows [ disable ] | cols num-cols }[ static ]
Syntax Description
Command Defaults
• If disable is not specified,
--More--
will display at the bottom of scrolling
screen output.
• If static is not specified, terminal settings will apply only to the current session.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix> show terminal
Terminal height set to 23.
Terminal width set to 79.
rows num_rows Specifies the number of terminal rows to be set. Valid
values are
2 to 200 .
disable Disables the
--More--
line from displaying on scrolling
screens as described in Section 3.1.8 .
cols num_cols Specifies the number of terminal columns to be set. Valid
values are
2 to 100 .
static (Optional) Specifies that terminal settings will remain as set
for all future sessions.