UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
ENSTROM F-28F/280F SERIES MAINTENANCE MANUAL SUPPLEMENT 1
Rev.
7
11-3
Aug
28/17
SECTION 4
SYSTEM MAINTENANCE
NOTE
Removal or installation of equipment will change the aircraft empty
weight and empty weight c.g. These changes will be recorded on the
Basic Weight and Balance Record, as required.
4-1.
MD200 Series CDI
NOTE
All work must be accomplished in accordance with the Enstrom
F-28F/280F Series Maintenance Manual.
4-1-1. Removal
A. Remove the MD200 Series CDI in accordance with paragraph 7-18, A, steps 1 through 4
of the F-28F/280F Series Maintenance Manual.
4-1-2. Installation
A. Install the MD200 Series CDI in accordance with paragraph 7-18, A, steps 5 through 7 of
the F-28F/280F Series Maintenance Manual.
4-2.
Figures and Electrical Diagrams
A. The GTN 650 installation is shown in Figure 11-1.
B. The GTN 650 wiring interfaces are shown in Diagrams 11-1 through 11-3.
Visit www.enstromhelicopter.com for instructions to order an original manual and to register for email notification of updates.