Enertech Global
85
EAV - EME/EMD Rev. A Models
Installation and Operations Manual
Hot Water
Under settings, scroll down to Domestic Hot Water (after
entering passcode).
•
Hot Water Economy OFF:
Electric immersion heat is used
under high demand situations. Immersion heat is engaged
after adjustable Aux HW Delay setting.
•
Hot Water Economy ON:
Compressor only hot water, no
electric immersion heat is used (not recommended).
3.1.1 Before Code
3.1.2 Before Code
3.1.0 Advanced Passcode
3.2.0
3.2.1 Heat Curve
3.3.0
3.4.1 Heat Min Temp
3.4.2 Heat Max Temp
3.4.3 Cool Setpoint
3.1.1 After Code (note: file name is 3.1.0.BMP)
3.1.1 Aux Heat Delay
3.3.1 Heat Setpoint
3.4.0
3.5.0
3.5.1 Aux HW Delay
Section 9: On-Board Controls
3.6.0
3.6.1 Hot Water Setpoint
3.6.2 Hot Water Deadband
3.7.2 Load Pump Max Speed
3.7.3 Delta Temp Heat Setpoint
3.7.4 Deta Temp Cool Setpoint
3.8.1 Pressure Units
3.8.2 Replace Filter
3.9.0
3.7.0
3.7.1 Load Pump Min Speed
3.7.5 Temp Units
3.8.0
3.9.0.1
3.9.0.2
•
Hot Water Priority:
See Indoor Climate.
•
Hot Water Setpoint:
Target tank temperature for DHW
operation.
•
Hot Water Deadband:
Temperature difference from
setpoint to minimum temperature the tank can drop to
before heat pump is engaged.