EnerSys OutBack POWER Mojave OGHI8048A, Руководство оператора

Страница: 29 / 116

900-00275-01-001 Rev A
29
User Interface
Figure 13 OPTICS RE Account
3. Create an account to be able to log in. From www.opticsre.com , click Create an Account . See
A
in
Figure 13.
4. Fill in the appropriate account information fields. (See
B
in Figure 13.)
a. Check the I’m not a robot box.
b. After reading the terms of service, check the I agree to the terms of service box.
c. Click the Create button at the bottom of the screen.
5. OPTICS RE will send an email to the listed address for verification. Click on the confirmation within the
email. Once confirmed, the account will be set up and ready for login.
To add a Mojave inverter to a Site:
1. Sign in to OPTICS RE. Note that the following steps require a valid MAC address from page 24.
2. Click on Add a Profile .
3. Set the System Type as Mojave .
4. Enter the MAC address for a Mojave inverter to be added to the Site . This unit must be online so that
OPTICS RE can recognize it.
5. Select the existing Profile to add the selected inverter.
6. Select the existing Site to add the selected inverter.
7. Enter a unique System name to designate the inverter.
8. Verify device registration.
Once these steps are implemented, OPTICS RE can monitor each System on a Site . It can deliver
aggregated Site data (by clicking on a Profile ) or communicate with individual System units for
settings, warnings, and errors.
IMPORTANT:
 Ensure that the OpticsRE status of each inverter shows as Connected . See the
Network
tab on page 24.
 Make certain to record the MAC address for each inverter.
A
B
3